Service: Air and non-combustible, compatible gases (natural gas option available).
Wetted Materials: Consult factory.
Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy: Â±2% of FS (Â±3% on - 0, -100 Pa, -125 Pa, 10MM and Â±4% on - 00, -60Pa, -6MM ranges), throughout range at 70Â°F (21.1Â°C).
Pressure Limits: -20 in Hg to 15 psigâ (-0.677 to 1.034 bar); MP option: 35 psig(2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection Note on next page.
Temperature Limits: 20 to 140Â°F* (-6.67 to 60Â°C).
Size: 4Ë (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8Ë female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Standard Accessories: Two 1/8Ë NPT plugs for duplicate pressure taps, two 1/8Ë pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval: RoHS.
*Low temperature models available as special option.
â For applications with high cycle rate within gage total pressure rating, next higher rating is recommended. See Medium and High pressure options at lower left.
FF-4, Kaveri Complex, Near Rto Circle, Subhash Bridge, Ahmedabad, Gujarat, 380027, India